Tuscan Cloud

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width " | Height " | Depth "

White plastic tilt out tray which can be used in a 30" or 33" sink base (2 can be used per sink base).

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 12x30 wall cabinet. This can be used to configure the back of an island or peninsula or on the side of a 30"H x 12"D wall cabinet.

Width " | Height " | Depth "

White plastic tilt out tray. 1 tray can be used in a 24" or 27" sink base, or 2 trays can be used in a 36", 39", 42" or 48" sink base.

Width " | Height " | Depth "

Clear glass door for a 15x30 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 15x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width " | Height " | Depth "

Clear glass door for a 15x36 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Clear glass door for a 15x42 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Clear glass door for a 18x30 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 18x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width " | Height " | Depth "

Clear glass door for a 18x36 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Clear glass door for a 18x42 wall cabinet. The glass will be pre-installed.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 21x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 24" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 24" | Height 2.5" | Depth 10"

Stainless steel floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width " | Height " | Depth "

White plastic tilt out tray that can be used in a 30" sink base.

Width " | Height " | Depth "

Clear glass door for a 24x30 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 24x36 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 24x42 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width .75" | Height 96" | Depth 24"

Refrigerator end panel. Both 96" sides are edge-banded.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 30" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 30" | Depth .25"

Wall skin that can be cut to size as needed.

Width " | Height " | Depth "

Clear glass door for a 30x30 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 30x36 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 30x42 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width .75" | Height 96" | Depth 30"

Refrigerator end panel. Both 96" sides are edge-banded.

Width 36" | Height 12" | Depth .75"

Arched recessed panel valance that can be trimmed up to 3" on each side.

Width 36" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 36" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 36" | Height 2.5" | Depth 10"

Stainless steel floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 4.5" | Height 36" | Depth 4.5"

Standard post. Top section is 4" tall and bottom section is 6-1/4" tall, 2" must be trimmed from the top or bottom before installation. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 36" | Depth .25"

Wall skin that can be cut to size as needed.

Width " | Height " | Depth "

Clear glass door for a 36x30 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 36x36 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width " | Height " | Depth "

Clear glass door for a 36x42 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width 3" | Height 30" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 4 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 42" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 5 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 96" | Depth 27"

Tall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 48" | Height 96" | Depth .5"

Back panel that is made of 1/2" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 42" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 42" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 3" | Height 42" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 42" | Depth .25"

Wall skin that can be cut to size as needed.

Width 48" | Height 12" | Depth .75"

Arched recessed panel valance that can be trimmed up to 3" on each side.

Width 48" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 54" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 54" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 54" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a 6x30 filler (sold separately - see SKU WF630). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" filler (SKU WF630) must be ordered separately. An additional overlay or decorative filler can be installed on the 6" filler if desired (also sold separately).

Width 6" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 3" | Height 84" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 9" | Height 30" | Depth 24"

Spice pull out that comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. 9" base cabinet must be ordered separately.

Width 3" | Height 90" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 96" | Height 5.5" | Depth .75"

Straight valance.

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 9x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 96" | Height " | Depth 1.25"

Large batten molding.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x30 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x36 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x42 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x30 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x36 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x42 diagonal corner wall cabinet. The glass will be pre-installed.

Width 3" | Height 36" | Depth 3"

Corner post. Height on top of the post will be 4", the bottom height is 6-1/4", 2" must be trimmed from the top or bottom of the post. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 3.5" | Height 12.25" | Depth 8"

Large decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 22.625" | Height " | Depth 22"

Large trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 5.25" | Height 12.5" | Depth 4.5"

Medium decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x30 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x36 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x42 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x84 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x90 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x96 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x30 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x36 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x42 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 3" | Height 34.5" | Depth 2.25"

Base plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width " | Height " | Depth "

Lazy susan accessory for a 24x30 diagonal wall cabinet. It will have an adjustable metal post and two 18" plastic trays. Trays will be 2" high. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height " | Depth "

Lazy susan accessory for a 24x36 or 24x42 diagonal wall cabinet. It will have an adjustable metal post and three 18" plastic trays. Trays will be 2" high. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 3.75" | Height 6.5" | Depth 3.5"

Small decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 14.625" | Height " | Depth 22"

Small trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.

Width | Height | Depth

Touch up kit that includes a stick, marker, and scraper.

Width 11.5" | Height 29.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 35.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 36"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 41.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 42"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.75" | Height | Depth

Set of 4 wainscot panels to be used on the exposed side of an 84" cabinet or accessory (pantry, oven cabinet, refrigerator panel, etc...). It will match the door style of the cabinets being ordered.

Width 11.75" | Height | Depth

Set of 4 wainscot panels to be used on the exposed side of an 90" cabinet or accessory (pantry, oven cabinet, refrigerator panel, etc...). It will match the door style of the cabinets being ordered.

Width 11.75" | Height | Depth

Set of 4 wainscot panels to be used on the exposed side of an 96" cabinet or accessory (pantry, oven cabinet, refrigerator panel, etc...). It will match the door style of the cabinets being ordered.

Width 23.5" | Height 29.5" | Depth "

Wainscot base panel, to be used on the exposed side of a base cabinet. It will match the door style of the cabinets being ordered.

Width " | Height " | Depth "

Lazy susan accessory for a 24x30 diagonal wall cabinet. It will have an adjustable metal post and two 18" wood trays. Trays will be 2" high. ***This item should be installed prior to shipment so please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height " | Depth "

Lazy susan accessory for a 24x36 or 24x42 diagonal wall cabinet. It will have an adjustable metal post and three 18" wood trays. Trays will be 2" high. The 42" pole can be trimmed to fit the 36" high cabinet, if needed. ***This item should be installed prior to shipment so please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height " | Depth "

Lazy susan accessory for a 27x30 diagonal wall cabinet. It will have an adjustable metal post and two 20" wood trays. Trays will be 2" high. ***This item should be installed prior to shipment so please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height " | Depth "

Lazy susan accessory for a 27x36 or 27x42 diagonal wall cabinet. It will have an adjustable metal post and three 20" wood trays. Trays will be 2" high. The 42" pole can be trimmed to fit the 36" high cabinet, if needed. ***This item should be installed prior to shipment so please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 1.5" | Height 96" | Depth 24"

Refrigerator end panel with 1-1/2" stile on the front. The panel itself is 3/4" thick.

Width 1.5" | Height 96" | Depth 24"

Refrigerator end panel with 1-1/2" stile on the front. The panel itself is 3/4" thick.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 1-1/2" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 1-1/2" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 3" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 3" return.

Width 96" | Height 1.25" | Depth 1.25"

Outside corner molding. Inside height and depth is 7/8".

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width " | Height 4" | Depth "

Roll out tray to be used in a 15" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in an 18" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 21" base cabinet. Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 24" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 27" base cabinet. Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 30" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 33" base cabinet. Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height 4" | Depth "

Roll out tray to be used in a 36" base cabinet. The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 11.5" | Height 14.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

13oz aerosol paint spray can to be used for general touch ups (for example, spraying the edges of molding before installation, cosmetic touch-up after installation, spraying the edges of toe kick or loose panels and finished end skins). Please note this is not intended to be used to refinish a cabinet or accessory such as trim moldings and touch-ups are recommended to be completed by a qualified cabinet installer.

Width 96" | Height " | Depth "

Shaker crown molding that is reversible so can be installed two ways. When installed, it will be 3-1/4" high and will stick out from the cabinet 3-1/4".

Width 23-1/2" | Height 14-1/2" | Depth 24"

Wainscot panel for a 15" high, 24" deep cabinet. This panel is a great option when stacking a 15" high wall cabinet with an increased depth, above a pantry or oven cabinet.

Width 3/4" | Height 34.5" | Depth 24"

Appliance end panel that finished on two sides and edge-banded on 2 vertical (34-1/2”) edges, there will not be a front stile on this panel.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 84"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 90"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 5-1/2" | Height 29-3/8" | Depth

Decorative panel that can be used with a 6" filler, to be installed on a 6" spice pull-out or in place of an overlay filler. The panel will match the door style of the collectoin it's ordered (the left and right door stiles will have a reduced width). *Please note that this item is made to order and carries an extended lead time of 6-8 weeks, any items ordered with it, from the same (or matching) collection will also incur the extended lead time.*

Width 7/8" | Height 5" | Depth 7/8"

Toe kick cap made from solid wood that will match the finish of the collection. It is used to finish the exposed side of the toe kick end and will need to be cut on site, prior to installation.

Width 1-1/2" | Height 34.5" | Depth 24"

Appliance end panel with a 1-1/2" stile on the front, the stile is finished on front face and 2 long edges. Panel is 1/2" thick plywood and is finished on 2 sides.

Width | Height | Depth

Pint of paint. The paint will need to be applied with a paint sprayer.

Width | Height | Depth

Quart of paint. The paint will need to be applied with a paint sprayer.

Width 3" | Height 30" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth 12"

Wall column that can be trimmed on site if needed.

Width .75" | Height 96" | Depth 12"

Refrigerator end panel. Both 96" sides are edge-banded.

Width 3" | Height 36" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 96"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.